Can I add on to my existing pallet rack in Strongsville?

Usually, if the connection matches and the proposed configuration has the required capacity. "Teardrop" is not universal across manufacturers. Send photos of the upright face, beam connector and any manufacturer label so we can match new components to your existing system.

What aisle width do I need?

Your lift truck sets the aisle width: counterbalance trucks typically need about 12–13 feet, reach trucks about 8–10 feet, and very-narrow-aisle equipment about 5–6 feet. We confirm the truck specifications and actual load dimensions before setting the layout. Aisle width is one of the biggest drivers of storage density.

What size pallet rack do I need?

A 42-inch-deep upright is a common starting point for a standard 48-inch-deep pallet; a 96-inch beam commonly holds two 40-inch-wide pallets, with 108-inch and 144-inch beams also common, the latter for three pallets. Measure the real pallets, including overhang. Rack height follows your clear height and forklift lift height, and the final beam selection also accounts for load capacity and handling clearance.

How much does pallet rack cost?

Price depends on pallet positions, rack height, beam capacity, decking, freight and installation. Send your pallet size, heaviest load per level, clear height and building size for a free CAD layout and itemized quote. We supply new material only.

How long does it take to get and install pallet rack?

Standard teardrop sizes often quick-ship; high-density systems and non-standard sizes take longer, and the lead time is confirmed on your quote. Installation time depends on bay count and site readiness. We agree delivery and work-area access before scheduling the installation.

Warehouse Relocation system inside a Ohio warehouse

Strongsville, Ohio

Warehouse Relocation Services in Strongsville, OH

Name: Cleveland Pallet Rack
Address: 11811 Shaker Blvd., Cleveland, OH, 44120, US
Telephone: (216) 434-6607
Price range: $$

Moving a warehouse in Strongsville becomes a storage problem when busy interstate dispatch windows limiting when rack can be removed. A carrier can transport steel, but it cannot decide which rows should come down first or whether yesterday’s beam elevations suit tomorrow’s building. Near I-71/I-80 and Foltz Parkway, the rack move needs to be planned alongside inventory access, trailer arrivals and the date the old premises must be cleared.

Our warehouse relocation service starts with both floor plans and the equipment you intend to reuse. We identify what can move, what needs review and what the destination requires. Call (216) 434-6607 for a free consultation before the move schedule becomes fixed.

(216) 434-6607

Why Strongsville Warehouses Work With Us

A highway-oriented distribution building still needs room for trailers, receiving and outbound staging before extra rack lanes are counted. For a Strongsville project near Strongsville’s business parks, that means checking the actual floor plan before treating an open rectangle as available storage. We compare both buildings, including columns, dock approaches, clear height and the systems that must remain active while equipment is removed.

The industrial activity around I-71/I-80 and Foltz Parkway gives your project a practical setting, not a reason to assume every building behaves alike. Where busy interstate dispatch windows limiting when rack can be removed, we build the move sequence around the inventory that cannot disappear from service. Reusable rack is identified and assigned to the new drawing before dismantling begins.

As a division of Warehouse Equipment & Supplies Co., we connect your storage requirements with design, quoting and installation planning. You receive an itemized scope, a drawing to review and a contact for revisions. Delivery access, work zones and approval responsibilities are discussed before the schedule is agreed.

Free warehouse consultation

CAD layout with position counts

Installation by experienced crews we schedule and manage

Warehouse storage rows to be measured before relocation

Pallet rack beams and uprights requiring identification before a move

Operations We Rack Around Here

Industrial corridors in this service area include I-71/I-80 and Foltz Parkway, Strongsville’s business parks.

light manufacturing

regional distribution

How Warehouse Relocation Works

Teardown, identify, transfer and reinstall your storage systems with a plan for the new building.

Survey and plan

Inventory the rack, identify manufacturer and capacities, and measure the destination before deciding what can be reused.

Label and dismantle

Unload and isolate the work area, label reusable components by destination, then dismantle in a planned sequence.

Coordinate transport

Group and protect beams, frames and accessories. Coordinate load order, carrier responsibilities and receiving windows.

Reinstall and hand over

Rebuild to the approved drawing, set the rack anchored to the floor and install protection, and document capacities before the rows return to service.

What a Warehouse Relocation Project Includes

We start the Strongsville warehouse relocation with an equipment inventory: frame heights, beam lengths, connector styles, decking, protection and any specialty storage. Photos and existing drawings help identify the manufacturer, but condition and capacity documentation still need review. Your destination plan includes clear height, columns, aisle access and forklift requirements. Existing steel is reused only where it suits the approved configuration.

The move plan then assigns components to destination rows and labels them before teardown. Your team and ours agree who empties inventory, isolates work areas, provides lifting equipment and handles carrier arrangements. Beams, frames and accessories are grouped for the receiving sequence, so the first material unloaded is useful for the first installation zone rather than buried beneath another shipment.

We coordinate the destination layout with your move sequence. Where the new building needs extra positions, different beam levels or additional new components, those items appear separately in the quote. Transport coordination, dismantling and installation responsibilities are written into the scope rather than assumed.

At the destination, installers rebuild to the approved drawing and manufacturer requirements, with the rack anchored to the floor and protection in place. The handover includes configuration and capacity information, a review of remaining work and agreed access to completed zones. Your Strongsville operation gets a storage layout for the new building, not simply the old rows repeated in a different address.

Businesses moving to a new warehouse

Phased moves while orders continue

Rack reconfiguration in a larger building

Adding new rack alongside reusable components

Call (216) 434-6607

Recent Installations

Racking projects completed for warehouses across Greater Cleveland and Northeast Ohio.

View More Projects

Get a Warehouse Relocation Quote for Your Strongsville Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (216) 434-6607.

Cleveland Pallet Rack

11811 Shaker Blvd.

Ste 204 #1118

Cleveland, OH 44120

(216) 434-6607

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Cleveland Pallet Rack regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.